Two towns, completely surrounded by Dallas
Highland Park came first. John S. Armstrong started developing it in 1906, and it incorporated in 1913. Turtle Creek runs through it, and Exall Lake was made by damming the creek back in the 1890s. Highland Park Village opened in 1931 as one of the first shopping centers of its kind in the country.
University Park grew up around SMU, which opened in 1915, and incorporated in 1924. Snider Plaza is its main shopping street. Together the two towns sit in the middle of Dallas, mostly in ZIP codes 75205 and 75225, with Preston Hollow to the north and Oak Lawn and Uptown to the south.
Both have their own codes and job-site rules. A duct cleaning is a service call inside the house, but if your home is mid-remodel, the builder's site rules apply to us too. Tell us when you book.
Old houses and big rebuilds on one street
Starting around the 1970s, rising land values meant smaller Park Cities houses got torn down and replaced with much larger ones, and it hasn't stopped. A typical block has a few 1920s or 1930s originals, several big newer houses, and sometimes one more going up.
The older homes came before central air. Their ducts were retrofitted into attics, closets and chases, and many still have plaster ceilings and heavy decorative grilles. We look at how the system was put in before we start, and our camera inspection is the easy way to see the inside of runs nobody has looked at in decades.
The new homes usually have several systems, often with air handlers in the attic. They're tighter and better insulated, but the returns can be small for the house, so they load up quickly.
| Situation here | What happens in the ducts | Our advice |
|---|---|---|
| 1920s or 30s original home | Retrofit routing, painted-in grilles, plaster ceilings | Inspect first, then careful cleaning |
| Large new build, several systems | Drywall dust in upstairs returns, dusty blower | Clean the problem system first; others quoted |
| Teardown next door | Fine grit on supply registers, clogged filters | Better filter now, cleaning after the work |
| Your own remodel just finished | Construction debris in returns and near the blower | Full cleaning once every trade is done |
Moving into a new house: a five-minute check
Before you schedule anyone, including us, do this yourself on a new or just-renovated house:
- Unscrew one return grille on each system and look inside with a flashlight. A white or gray film is drywall dust.
- Look at the filter. If it's packed after a few weeks, the system ran during construction.
- Hold a white paper towel over a supply register for a minute with the fan on. Gray spots mean debris is moving, and our page on dust coming out of vents explains the usual causes.
- Ask the builder if the registers were sealed while they sanded. The EPA recommends it (EPA guidance), and plenty of crews skip it.
If all four look clean, you probably don't need us yet.
Pricing a house with four systems
Our standard cleaning covers one full system, every supply and return vent on it. A Park Cities house with four thermostats is four duct systems, and each extra one gets quoted in writing after the crew sees it. Nothing gets added after the fact, and you can clean just the systems giving you trouble. If you're comparing bids from other companies, read how to spot a bait-and-switch on a $99 duct cleaning first, then see what our whole-house duct cleaning includes.



